Hi out there,
So i figured i would go ahead and post this thread in advance to see how it goes, and to sort of aid in the building process from the beginning before i REALLY get started into it. So im currently away from the Jeep due to work, but have been stockpiling parts and making plans for the build for when i return on or around Jun 1st.
Purpose = The purpose of the build is to prepare the Jeep for 1. the trans america trail / moab and 2. really whatever comes its way in the future as i do quite a bit of serious offroading as well as hit the trails for any number of reasons about 3 times a week if not more.
So far the Jeep sits as such:
stock engine
3.5 coil spring lift
35" tires
pro-comp alloy wheels
Hard Top
Custom made American Eagle front and rear bumper
smittybilt xrc 9.5 winch
led lights in front and rear bumpers
Dana 30F / Dana 44R axles 4:10 gears
factory "rubi-rails"
smittybilt steel fenders
JKS swaybar quick disconnects
Currently Stockpiled in the garage:
Pro Comp Dual steering Stabilizer
Poison Spider Hood Louver
Spicer UD44 front axle with e-locker
front SRC bumper
Rear XRC Carbine Bumper
Light Bar w/ brackets
Overland Bound Member Emblem
Pro Comp Pre-Runner shocks
Rugged Ridge XHD Snorkel kit
Order list:
Control Arms
Roll Cage
Rear locker
tailgate table
tire carrier
a few other odd and ends.
Any suggestions as to extra parts or specific brands? Custom built things i can throw in the mix? Life Hacks?
Any and ALL suggestions will be greatly appreciated. I fully understand that this is my rig, but i would love for it to be a community driven build.
Will continue Stockpiling a couple more parts to start the build in June and post it here from start to time of departure on the TAT.
So i figured i would go ahead and post this thread in advance to see how it goes, and to sort of aid in the building process from the beginning before i REALLY get started into it. So im currently away from the Jeep due to work, but have been stockpiling parts and making plans for the build for when i return on or around Jun 1st.
Purpose = The purpose of the build is to prepare the Jeep for 1. the trans america trail / moab and 2. really whatever comes its way in the future as i do quite a bit of serious offroading as well as hit the trails for any number of reasons about 3 times a week if not more.
So far the Jeep sits as such:
stock engine
3.5 coil spring lift
35" tires
pro-comp alloy wheels
Hard Top
Custom made American Eagle front and rear bumper
smittybilt xrc 9.5 winch
led lights in front and rear bumpers
Dana 30F / Dana 44R axles 4:10 gears
factory "rubi-rails"
smittybilt steel fenders
JKS swaybar quick disconnects
Currently Stockpiled in the garage:
Pro Comp Dual steering Stabilizer
Poison Spider Hood Louver
Spicer UD44 front axle with e-locker
front SRC bumper
Rear XRC Carbine Bumper
Light Bar w/ brackets
Overland Bound Member Emblem
Pro Comp Pre-Runner shocks
Rugged Ridge XHD Snorkel kit
Order list:
Control Arms
Roll Cage
Rear locker
tailgate table
tire carrier
a few other odd and ends.
Any suggestions as to extra parts or specific brands? Custom built things i can throw in the mix? Life Hacks?
Any and ALL suggestions will be greatly appreciated. I fully understand that this is my rig, but i would love for it to be a community driven build.
Will continue Stockpiling a couple more parts to start the build in June and post it here from start to time of departure on the TAT.
Last edited: