so 5cm lift is ok but what if try more. so i tried 7cm lift or 2,7' lift just on strut spacers and result . never seen anyone done that high lift just on strut spacers. Now testing it how it goes on high speeds , corners and such, alignment done.
now rear diff have over 12' ground clearance. front little less but over 11' still. its high now . really high. so high that im 186cm height just reaching to close rear gate when its full open. any smaller person couldnt reach it anymore.
for rear alignment need to make some longer link or just move hole more
or just buy adjustment links kit, but whats the point buying if i wanna do it myself and see.
so rear camber now is positive which is not bad being positive and there is no way to make it like zero camber or near zero, because top link is not let it do any adjustments there.
but for me with those large tires now it looks kinda proper, its in good look with those wheels at least. for smaller wheels 5cm lift looks fine there.
so in front i reached limit of how much it could drop down now, no way to make it more droping in front at least.
and in rear well to put there strut you need to compress spring and then try to compress strut as much as you can , just then you can like put that strut bottom bolt
whos not letting it drop more ? well cv axle, as you lift it wheel goes inside and as it goes inside that cv axle goes more and more pushed inside until it reaches its limits. so shorter cv axle in rear now would let it drop more. iv had those from some impreza model or similar on my 2001.