When we talk about tools, we also have to talk about health and safety measures.

  • HTML tutorial

El-Dracho

Ambassador, Europe
Moderator
Member
Supporter
Investor

Off-Road Ranger III

13,288
Lampertheim, Germany
First Name
Bjoern
Last Name
Eldracher
Member #

20111

Ham/GMRS Callsign
DO3BE
When we talk about tools, we also have to talk about health and safety measures. That is important. For the commercial sector, there are often precise regulations on this, but when we tinker or repair something privately, these measures are just as important. Very easily something happened during vehicle repair or mounting new equipment. With the right protective clothing, risks can be effectively mitigated.

Safety starts with obviously very simple things. These include order and cleanliness in the workplace. A cable lying crosswise, a heavy tool lying on a corner of the workbench, oily tools or spilled liquids on the floor. These are just a few examples that can quickly lead to an accident. By the way, working is also more fun when there is order, because then you can work instead of looking for something.

Great dangers also lurk in areas where loads are lifted. For example, a vehicle that is jacked up. Extreme caution and attention are required here. The vehicle must always be lifted and jacked up properly and safely. And always work with the right tool, that is, the tool intended and designed for the job. This can also prevent serious accidents

We continue with the correct personal protective equipment. In companies, there are usually hazard analyses from which it can be derived what must be worn in order to minimize risks as far as reasonably possible. We should also remember this in our free time.

During typical maintenance work, we often come into contact with harmful operating fluids. Protective gloves are the order of the day here. If we are painting or sanding, we should also wear a dust mask and safety goggles. It is also important to wear suitable footwear, preferably safety shoes, which provide the necessary protection for the work we are doing. Sometimes it is also machines that we use and that are loud. Against this noise we should protect ourselves effectively with a suitable hearing protection. Here, simple earplugs come into question, better and more comfortable to wear is a proper capsule hearing protection.

For welding or electrical work, further protective measures are of course required. Super important in welding are, of course, the complete safety equipment such as flame-retardant, high-necked and not contaminated by flammable substances clothing, safety shoes with gauntlets, special welding gloves, a leather apron, welding helmet and so on.

It is also important not to wear just any gloves, or any protective goggles. There is something available for every purpose. Pay attention to the specifications for abrasion resistance, protection against heat, cold or moisture, protection against electrostatics or permeation resistance (because of chemicals). Of course, it is also important that you have sufficient feeling in the gloves for the respective work. For other protective measures such as safety glasses, there are also categorizations, some glasses are designed for protection against liquids, gases, coarse or fine dust or impacts. All this to name just a few examples.

A good basic set containing for example a work jumpsuit, gloves and goggles for repairs on the trail does not take up much space and weight, and thus also fits into any overlanding rig. I always have a jumpsuit with me because it also has the advantage that if I repair something on the road, I can quickly put it on and off and get back into the car with clean clothes after work.

If you have a breakdown on the road, there are also dangers lurking there. Make sure you secure the site of the breakdown before making any repairs. If traveling in the desert or other hot areas, it might be a good idea to avoid working in the midday heat and drink enough to avoid health issue.

Many jobs should only be carried out by specialists or with the appropriate knowledge. This includes in particular safety-relevant components on our vehicles. In any case, it is important to ensure a sufficiently safe working environment, among other things by using the right protective equipment. The subject is very diverse and complex, and there are numerous standards and regulations on this in the individual countries.

So, these are just a few examples and ideas from my experience to draw attention to this important topic and to encourage people to think about it. I suffered an eye injury at the beginning of the year which fortunately healed quite well, so I know what I'm talking about and what can happen when working. I'm sure many of you have more experience on the subject. I would be happy about more contributions on this important topic and tips on what safety equipment you carry when you are on the road.

Think safety!
 

Amanda C

Rank V
Member
Investor

Off-Road Ranger I

1,720
Oshawa, ON, Canada
First Name
Amanda
Last Name
Cassidy
Member #

15568

Ham/GMRS Callsign
M7WYO
Service Branch
Royal Navy - Radar
When we talk about tools, we also have to talk about health and safety measures. That is important. For the commercial sector, there are often precise regulations on this, but when we tinker or repair something privately, these measures are just as important. Very easily something happened during vehicle repair or mounting new equipment. With the right protective clothing, risks can be effectively mitigated.

Safety starts with obviously very simple things. These include order and cleanliness in the workplace. A cable lying crosswise, a heavy tool lying on a corner of the workbench, oily tools or spilled liquids on the floor. These are just a few examples that can quickly lead to an accident. By the way, working is also more fun when there is order, because then you can work instead of looking for something.

Great dangers also lurk in areas where loads are lifted. For example, a vehicle that is jacked up. Extreme caution and attention are required here. The vehicle must always be lifted and jacked up properly and safely. And always work with the right tool, that is, the tool intended and designed for the job. This can also prevent serious accidents

We continue with the correct personal protective equipment. In companies, there are usually hazard analyses from which it can be derived what must be worn in order to minimize risks as far as reasonably possible. We should also remember this in our free time.

During typical maintenance work, we often come into contact with harmful operating fluids. Protective gloves are the order of the day here. If we are painting or sanding, we should also wear a dust mask and safety goggles. It is also important to wear suitable footwear, preferably safety shoes, which provide the necessary protection for the work we are doing. Sometimes it is also machines that we use and that are loud. Against this noise we should protect ourselves effectively with a suitable hearing protection. Here, simple earplugs come into question, better and more comfortable to wear is a proper capsule hearing protection.

For welding or electrical work, further protective measures are of course required. Super important in welding are, of course, the complete safety equipment such as flame-retardant, high-necked and not contaminated by flammable substances clothing, safety shoes with gauntlets, special welding gloves, a leather apron, welding helmet and so on.

It is also important not to wear just any gloves, or any protective goggles. There is something available for every purpose. Pay attention to the specifications for abrasion resistance, protection against heat, cold or moisture, protection against electrostatics or permeation resistance (because of chemicals). Of course, it is also important that you have sufficient feeling in the gloves for the respective work. For other protective measures such as safety glasses, there are also categorizations, some glasses are designed for protection against liquids, gases, coarse or fine dust or impacts. All this to name just a few examples.

A good basic set containing for example a work jumpsuit, gloves and goggles for repairs on the trail does not take up much space and weight, and thus also fits into any overlanding rig. I always have a jumpsuit with me because it also has the advantage that if I repair something on the road, I can quickly put it on and off and get back into the car with clean clothes after work.

If you have a breakdown on the road, there are also dangers lurking there. Make sure you secure the site of the breakdown before making any repairs. If traveling in the desert or other hot areas, it might be a good idea to avoid working in the midday heat and drink enough to avoid health issue.

Many jobs should only be carried out by specialists or with the appropriate knowledge. This includes in particular safety-relevant components on our vehicles. In any case, it is important to ensure a sufficiently safe working environment, among other things by using the right protective equipment. The subject is very diverse and complex, and there are numerous standards and regulations on this in the individual countries.

So, these are just a few examples and ideas from my experience to draw attention to this important topic and to encourage people to think about it. I suffered an eye injury at the beginning of the year which fortunately healed quite well, so I know what I'm talking about and what can happen when working. I'm sure many of you have more experience on the subject. I would be happy about more contributions on this important topic and tips on what safety equipment you carry when you are on the road.

Think safety!
Hi Bjoern,

Thanks for creating the new thread, this is such an important topic and one that is not always on our minds, I too have suffured an eye injury of the cornea and I can tell you the thought of loosing ones sight is scary, my incident was a dog's paw and the toe nail scratching my eye. 2 years and much pain its healed, I dont think that would have been the case if it was a metal shard or hot chemical liquid etc. Being Ex Royal Navy and Operations, I have seen a finger ripped out of a socket when a sailor was handling a wire and a rogue metal strand, pierced the gloves he was wearing and got caught on his wedding band and as the wire got taught under weight it took his finger! So never wear rings when working metal winch lines etc, even with gloves! Thanks for the reminder I have just put in my suitcase my trusty ear defenders for when I head out to Canada to be reunited with my Rig, also they will come in handy for a noisy truck stop or walmart parking lot! Here is the link to my ear defenders and I can say they have served me well for many years, they are well made and fit for purpose!

Best wishes

Amanda


IMG-6149.jpg
 

Alanymarce

Rank IV

Trail Mechanic III

1,392
Colombia
Excellent posts!

We routinely talk through risks at a tactical level - when doing anything to the vehicle or starting any other task, and also at a strategic level - such as when planning a trip (e.g,, "Should we visit Kenya at all, given that the elections are next month?"). We have a rule that we don;t travel at night, with the commitment that if it looks as if we may have to we do a risk analysis and decide whether to stop before dark, or to continue with additional precautions.

Key to looking after ourselves and others is discussing what the hazards are, how they can manifest themselves, and what we need to do to manage the associated risks (including the option not to start).

It's so easy to start changing a wheel in a place where you're exposed, so easy to start cutting up a fallen tree without thinking of safety glasses, gloves, and the right footwear. Situational Awareness is key, and teamwork in planning and looking out for each other fundamental.

One more thought - the willingness to stop the job, step back, and rethink is critical.
 

Amanda C

Rank V
Member
Investor

Off-Road Ranger I

1,720
Oshawa, ON, Canada
First Name
Amanda
Last Name
Cassidy
Member #

15568

Ham/GMRS Callsign
M7WYO
Service Branch
Royal Navy - Radar
Excellent posts!

We routinely talk through risks at a tactical level - when doing anything to the vehicle or starting any other task, and also at a strategic level - such as when planning a trip (e.g,, "Should we visit Kenya at all, given that the elections are next month?"). We have a rule that we don;t travel at night, with the commitment that if it looks as if we may have to we do a risk analysis and decide whether to stop before dark, or to continue with additional precautions.

Key to looking after ourselves and others is discussing what the hazards are, how they can manifest themselves, and what we need to do to manage the associated risks (including the option not to start).

It's so easy to start changing a wheel in a place where you're exposed, so easy to start cutting up a fallen tree without thinking of safety glasses, gloves, and the right footwear. Situational Awareness is key, and teamwork in planning and looking out for each other fundamental.

One more thought - the willingness to stop the job, step back, and rethink is critical.
Thanks for the encouragement and support for this thread, great contribution and a wise piece of advice, stepping back and assessing the sitiation at hand is good advice before proceeding! Best wishes Amanda