Member III
I really like the way you made the pockets for your rock lights, might have to steal this idea whenever I get around to building my sliders. Are you going to hook those lights into the door striker so they come on when you open the door?
Explorer I
- 4,285
- First Name
- Michael
- Last Name
- Denniston
- Member #
-
3030
- Ham/GMRS Callsign
- KJ7LYZ
Thanks. Of course you may use this idea, ...for a small fee! JK.
Yeah, i will wire them into my switchpros unit and hook up a trigger wire to the door lights. This will allow them to be activated when unlocking the truck and by pushing a button on the dash.
Explorer I
- 4,285
- First Name
- Michael
- Last Name
- Denniston
- Member #
-
3030
- Ham/GMRS Callsign
- KJ7LYZ
Meanwhile, back at the ranch, A smoking deal was got...
So I had to get the winchplate for my FabFours bumper as well...
So I had to get the winchplate for my FabFours bumper as well...
Explorer I
- 4,285
- First Name
- Michael
- Last Name
- Denniston
- Member #
-
3030
- Ham/GMRS Callsign
- KJ7LYZ
Explorer I
Explorer I
- 4,285
- First Name
- Michael
- Last Name
- Denniston
- Member #
-
3030
- Ham/GMRS Callsign
- KJ7LYZ
Explorer I
Anytime in the future just give a shout if you need anything. I’m usually around
Member III
Explorer I
- 4,285
- First Name
- Michael
- Last Name
- Denniston
- Member #
-
3030
- Ham/GMRS Callsign
- KJ7LYZ
Explorer I
- 4,285
- First Name
- Michael
- Last Name
- Denniston
- Member #
-
3030
- Ham/GMRS Callsign
- KJ7LYZ
So now that the Sliders are 99% done, its time to move on to the next upgrade...
Explorer I
- 4,285
- First Name
- Michael
- Last Name
- Denniston
- Member #
-
3030
- Ham/GMRS Callsign
- KJ7LYZ
Last night I worked on getting the Smittybilt XRC 17.5 mounted to the FabFours plate. This WAS NOT a straight up bolt together job. It required me to elongate the factory holes as well as drill 4 new ones. But this allowed me to use all 8 bottom bolts which I felt was really important considering the weight of the truck.
Next I will be laying out for mounting the control box to the top of the bumper. This will require me to drill and cut a 1" x 3" elongated hole to allow the battery cables a path down to the winch.
Next I will be laying out for mounting the control box to the top of the bumper. This will require me to drill and cut a 1" x 3" elongated hole to allow the battery cables a path down to the winch.
Explorer I
- 4,285
- First Name
- Michael
- Last Name
- Denniston
- Member #
-
3030
- Ham/GMRS Callsign
- KJ7LYZ
Today was a shop day. Had the pleasure to get to use @MrWilsonWJ 's shop and equipment to get the front bumper R & R'd and the winch installed. The fork lift made it easy.
