Resolved Mechanical Breakdown

  • HTML tutorial
Anna_XJ98

Anna_XJ98

Rank II

Contributor II

327
Hamburg, Germany
First Name
Anna
Last Name
JeepXJ
Member #

47995

Support Alert created at 10:07 PM (GMT +0:00) on 05/11/2024 by Anna (Anna_XJ98).
Message:
Dear community, I need your help. We have arrived Scotland.
Just one day and approx. 300m we are stuck again after the last fix on the ignition coil. The vehicle was running fine until we stopped for a short break, when trying to start it again we have following situation again:

It is a ´98 Cherokee XJ 4.0 wich does crank but does not start.
We do have fuel pressure but no spark indicating that there might be a problem with the crankshaft position sensor, cam shaft position sensor or the ignition coil again.

We would like to give it a try with a new crank shaft position sensor, 56027866AE, cam shaft position sensor 56027023 or the ignition coil 56028172.
See also the picture as there are different plugs availabe depending on the fabrication year.
If someone would have any of those parts we are very happy to get in contact and buy those.

Does anyone know how to get quick help so that our vacation doesn't go to waste? ❤
Click to expand...
Additional Information

Important links:
Locations included in the Support Alert:

Location 1:
Address: A86, Newtonmore, PH20 1BX, United Kingdom​
Location note:​

Communications Channels included in the Support Alert:



View Support Alert

 
Jack Smith

Jack Smith

Rank II
Launch Member

Enthusiast I

404
Aberdeen, Scotland, UK
Member #

10363

Have you checked all your fuses? Was there any indication it was going to break down? You can call the AA breakdown recovery. They may be able to help you at the roadside.
 
El-Dracho

El-Dracho

Ambassador, Europe
Moderator
Member
Supporter
Investor

Off-Road Ranger III

13,288
Lampertheim, Germany
First Name
Bjoern
Last Name
Eldracher
Member #

20111

Ham/GMRS Callsign
DO3BE
@Polaris Overland Dave, Could you help or point in the right direction?

@Anna_XJ98 Good luck with fixing the problem and please let us know here once it is solved. Thank you.
 
Last edited:
Constantin

Constantin

Rank V
Launch Member

Advocate III

1,647
Nuremberg, germany
First Name
Constantin
Last Name
Alecu
Member #

3769

Anna_XJ98 said:
Support Alert created at 10:07 PM (GMT +0:00) on 05/11/2024 by Anna (Anna_XJ98).
Message:
Dear community, I need your help. We have arrived Scotland.
Just one day and approx. 300m we are stuck again after the last fix on the ignition coil. The vehicle was running fine until we stopped for a short break, when trying to start it again we have following situation again:

It is a ´98 Cherokee XJ 4.0 wich does crank but does not start.
We do have fuel pressure but no spark indicating that there might be a problem with the crankshaft position sensor, cam shaft position sensor or the ignition coil again.

We would like to give it a try with a new crank shaft position sensor, 56027866AE, cam shaft position sensor 56027023 or the ignition coil 56028172.
See also the picture as there are different plugs availabe depending on the fabrication year.
If someone would have any of those parts we are very happy to get in contact and buy those.

Does anyone know how to get quick help so that our vacation doesn't go to waste? ❤
Click to expand...
Additional Information

Important links:
Locations included in the Support Alert:

Location 1:
Address: A86, Newtonmore, PH20 1BX, United Kingdom​
Location note:​

Communications Channels included in the Support Alert:



View Support Alert

Click to expand...
Have you checked that the crank position sensor isn't unplugged? I once saw someone's sensor come into contact with the exhaust manifold and the insulation melted. It would be a great coincidence if that happened to you too and it could then be solved quite easily. I'll keep my fingers crossed!
 
Polaris Overland

Polaris Overland

Ambassador, Europe
Moderator
Member
Member

Pioneer I

11,171
Newtonhill, Stonehaven, Aberdeenshire, UK
First Name
Dave
Last Name
Spinks
Member #

3057

Service Branch
Royal Navy Veteran
Anna_XJ98 said:
Support Alert created at 10:07 PM (GMT +0:00) on 05/11/2024 by Anna (Anna_XJ98).
Message:
Dear community, I need your help. We have arrived Scotland.
Just one day and approx. 300m we are stuck again after the last fix on the ignition coil. The vehicle was running fine until we stopped for a short break, when trying to start it again we have following situation again:

It is a ´98 Cherokee XJ 4.0 wich does crank but does not start.
We do have fuel pressure but no spark indicating that there might be a problem with the crankshaft position sensor, cam shaft position sensor or the ignition coil again.

We would like to give it a try with a new crank shaft position sensor, 56027866AE, cam shaft position sensor 56027023 or the ignition coil 56028172.
See also the picture as there are different plugs availabe depending on the fabrication year.
If someone would have any of those parts we are very happy to get in contact and buy those.

Does anyone know how to get quick help so that our vacation doesn't go to waste? ❤
Click to expand...
Additional Information

Important links:
Locations included in the Support Alert:

Location 1:
Address: A86, Newtonmore, PH20 1BX, United Kingdom​
Location note:​

Communications Channels included in the Support Alert:



View Support Alert

Click to expand...
Unfortunately i can only check online and im currently in Germany.

Have you tried, they are about 30 miles north of you


Donald Mackenzie
62 Seafield Road
Inverness
Highland
IV1 1SG
United Kingdom

01463235777

If you can identify what you need i am more than happy ro order it and get it delivered to you.
Jeep is not so common in Scotland so specialist Jeep garages are few and far between.
 
Polaris Overland

Polaris Overland

Ambassador, Europe
Moderator
Member
Member

Pioneer I

11,171
Newtonhill, Stonehaven, Aberdeenshire, UK
First Name
Dave
Last Name
Spinks
Member #

3057

Service Branch
Royal Navy Veteran
Polaris Overland said:
Anna_XJ98 said:
Support Alert created at 10:07 PM (GMT +0:00) on 05/11/2024 by Anna (Anna_XJ98).
Message:
Dear community, I need your help. We have arrived Scotland.
Just one day and approx. 300m we are stuck again after the last fix on the ignition coil. The vehicle was running fine until we stopped for a short break, when trying to start it again we have following situation again:

It is a ´98 Cherokee XJ 4.0 wich does crank but does not start.
We do have fuel pressure but no spark indicating that there might be a problem with the crankshaft position sensor, cam shaft position sensor or the ignition coil again.

We would like to give it a try with a new crank shaft position sensor, 56027866AE, cam shaft position sensor 56027023 or the ignition coil 56028172.
See also the picture as there are different plugs availabe depending on the fabrication year.
If someone would have any of those parts we are very happy to get in contact and buy those.

Does anyone know how to get quick help so that our vacation doesn't go to waste? ❤
Click to expand...
Additional Information

Important links:
Locations included in the Support Alert:

Location 1:
Address: A86, Newtonmore, PH20 1BX, United Kingdom​
Location note:​

Communications Channels included in the Support Alert:



View Support Alert

Click to expand...
Unfortunately i can only check online and im currently in Germany.

Have you tried, they are about 30 miles north of you


Donald Mackenzie
62 Seafield Road
Inverness
Highland
IV1 1SG
United Kingdom

01463235777

If you can identify what you need i am more than happy ro order it and get it delivered to you.
Jeep is not so common in Scotland so specialist Jeep garages are few and far between.
Click to expand...
I've reached out in a few local 4x4 groups to see if they can suggest anywhere.
Hopefully i will be able to come back with good news
 
  • Like
Reactions: El-Dracho
You must log in or register to reply here.
Top Bottom