Traveler III
- 4,002
- First Name
- Kelly
- Last Name
- Herrin
- Member #
-
2032
- Ham/GMRS Callsign
- KFØDEX
How to Display Ambassador Coin?
- Thread starter Kelly
- Start date
Traveler III
- 4,002
- First Name
- Kelly
- Last Name
- Herrin
- Member #
-
2032
- Ham/GMRS Callsign
- KFØDEX
I was given this one by @BazzaJ.
Ahh yea well then um lets see..so you want to be able to view it from both sides? Like in the cab? Cause what you could do is get a plastic coin case seal it and then attach something to the sides and put it on say the dash
Then one side would be visible from the outside and one from inside
Then one side would be visible from the outside and one from inside
Influencer I
Influencer II
A small jewelry ring, a little heavy duty epoxy, a toothpick, and a fine chain. Rearview adornment.
Off-Road Ranger I
@Reconnoiter Get these and cut in half, 3m tape the half to a preferred location and drop your coin in. A little art earthquake putty in the bottom should hold it as your JEEP GOES BOUNCING DOWN THE ROAD!!!!!
Traveler III
- 4,002
- First Name
- Kelly
- Last Name
- Herrin
- Member #
-
2032
- Ham/GMRS Callsign
- KFØDEX
Traveler III
- 4,002
- First Name
- Kelly
- Last Name
- Herrin
- Member #
-
2032
- Ham/GMRS Callsign
- KFØDEX
Influencer II
Traveler III
- 4,002
- First Name
- Kelly
- Last Name
- Herrin
- Member #
-
2032
- Ham/GMRS Callsign
- KFØDEX
Last edited:
Influencer II
Influencer II
Influencer II
Traveler III
- 4,002
- First Name
- Kelly
- Last Name
- Herrin
- Member #
-
2032
- Ham/GMRS Callsign
- KFØDEX
Yours worked. I'm never giving this coin away, so I may just drill a small hole in the top, like this...
and hang it from the rear view mirror.
Influencer II
Traveler III
- 4,002
- First Name
- Kelly
- Last Name
- Herrin
- Member #
-
2032
- Ham/GMRS Callsign
- KFØDEX
Influencer II
Pathfinder II
You could always order a blank. That way you could display the ambassador coin with the AM number up, next to a regular challenge coin
