Off-Road Ranger I
- 1,451
- First Name
- Allen
- Last Name
- Murray
- Member #
-
27152
- Ham/GMRS Callsign
- WRJY639
Build/activities thread: 1989 Raider, 2010 Sequoia, and my other stuff.
- Thread starter irish44j
- Start date
will do. Yeah, I like how it looks a bit old-school, goes a bit better with this old truck than something modern :)
That, and it's basically the only one that would fit where I had to put it haha.
{OT} So today I got the opportunity to get aboard the NS Savannah, which was the first (and only) nuclear-powered commercial ship ever built in the US. It's been sitting at the old coal piers in the Baltimore port alongside an old Liberty Ship from WW2 for many years, and it's almost never open to get aboard, but today it was so I shot up to B-More to take a look. I had a model of this ship when I was a kid in the 80s :)
Anyhow, the ship's nuclear reactor isn't there any more, but otherwise it's literally a time capsule from 1960, with basically nothing remodeled or upgraded since it was decommissioned by 1971 or so. It's a cool picture of what people in 1960 thought "the future" would look like, and in truth it looks a lot like original Star Trek. So, before I get on with truck-building, figured I'd share a few pics
Here's the bar in the lounge, which served "Atomic Cocktails" back in the day
Old-school radio room. There were some HAM guys aboard using the ship's giant antennas for some long-range stuff, so that was interesting as well.
I don't think it was on the "self-guided tour" route, but I snuck into the forward cargo hold, which was pretty cool
The dining room was straight retro, with every overhead light set up with an "Atomic" symbol. Little touches.
The reactor is gone, but still some low-level radiation around, so can't go in
Yeah, so that was cool
--- break ---
Now back to the regularly-scheduled stuff: When I got home, my fridge slider had arrived. And as usual when FedEx delivers things, it looked like it went through WW2 to get here....SMH.
It turns out my measurements were good, and the tray fit under the sleeping platform....well, almost. I had to cut out a notch in the leg to make it fit. Also because the gas tank is right under the floor back here in the truck, I had to get a bit creative to mount a couple of the bolts for the slider. This one I just put a weld-nut in since I couldn't access the bottom to put a nut on. The rest I drilled through and got big washers/nuts under the floor, working around the exahust/suspension, etc. So in this pic you can see the notch in the platform leg on the left, and the shoddy weldnut in the floor.
To clear a couple bolts that mount other stuff in the floor, and to better level it on the "ribbed" pickup-truck-like floor, I used some leftover pieces of hardwood from a table I disassembled a while ago (I always keep good wood!), so the whole thing is about 1" off the actual floor:
The other reason for this is that the slider overlaps the fuel tank/pump access cover and I want to be able to get that off without taking the whole slider out. So this gives enough clearance to get to the two middle bolts and slide the cover out to the other side. There's one of the rusty-looking bolts...
So with that done, everything got bolted down (3 per side plus a sideways bolt through the wheel arch) and it's in, with the perfect clearance to the gearbox just forward of it.
And mounted up the fridge
So, that worked out great and fit just as envisioned. It would be cool to have a bigger fridge, but this is a small truck, so gotta work with the space I have. I have to do two things as follow-up to this:
I don't love using the power outlet on the other side of the cargo area (right below the new "door" from the previous project) since the wire would have to go across things. So I'll definitely put in a separate, dedicated power outlet on the right side behind the fridge (also to plug the Jackery into). And speaking of that, 2. I want to figure out a good place to mount the Jackery. I don't think there will be space on the slider (but maybe....), so I may fab something up so it fits in between the fridge and that black footlocker in the photo above. Will have to see how much space it takes up, once I actually get it.
Anyhow, the ship's nuclear reactor isn't there any more, but otherwise it's literally a time capsule from 1960, with basically nothing remodeled or upgraded since it was decommissioned by 1971 or so. It's a cool picture of what people in 1960 thought "the future" would look like, and in truth it looks a lot like original Star Trek. So, before I get on with truck-building, figured I'd share a few pics
Here's the bar in the lounge, which served "Atomic Cocktails" back in the day
Old-school radio room. There were some HAM guys aboard using the ship's giant antennas for some long-range stuff, so that was interesting as well.
I don't think it was on the "self-guided tour" route, but I snuck into the forward cargo hold, which was pretty cool
The dining room was straight retro, with every overhead light set up with an "Atomic" symbol. Little touches.
The reactor is gone, but still some low-level radiation around, so can't go in
Yeah, so that was cool
--- break ---
Now back to the regularly-scheduled stuff: When I got home, my fridge slider had arrived. And as usual when FedEx delivers things, it looked like it went through WW2 to get here....SMH.
It turns out my measurements were good, and the tray fit under the sleeping platform....well, almost. I had to cut out a notch in the leg to make it fit. Also because the gas tank is right under the floor back here in the truck, I had to get a bit creative to mount a couple of the bolts for the slider. This one I just put a weld-nut in since I couldn't access the bottom to put a nut on. The rest I drilled through and got big washers/nuts under the floor, working around the exahust/suspension, etc. So in this pic you can see the notch in the platform leg on the left, and the shoddy weldnut in the floor.
To clear a couple bolts that mount other stuff in the floor, and to better level it on the "ribbed" pickup-truck-like floor, I used some leftover pieces of hardwood from a table I disassembled a while ago (I always keep good wood!), so the whole thing is about 1" off the actual floor:
The other reason for this is that the slider overlaps the fuel tank/pump access cover and I want to be able to get that off without taking the whole slider out. So this gives enough clearance to get to the two middle bolts and slide the cover out to the other side. There's one of the rusty-looking bolts...
So with that done, everything got bolted down (3 per side plus a sideways bolt through the wheel arch) and it's in, with the perfect clearance to the gearbox just forward of it.
And mounted up the fridge
So, that worked out great and fit just as envisioned. It would be cool to have a bigger fridge, but this is a small truck, so gotta work with the space I have. I have to do two things as follow-up to this:
I don't love using the power outlet on the other side of the cargo area (right below the new "door" from the previous project) since the wire would have to go across things. So I'll definitely put in a separate, dedicated power outlet on the right side behind the fridge (also to plug the Jackery into). And speaking of that, 2. I want to figure out a good place to mount the Jackery. I don't think there will be space on the slider (but maybe....), so I may fab something up so it fits in between the fridge and that black footlocker in the photo above. Will have to see how much space it takes up, once I actually get it.
Off-Road Ranger I
- 1,451
- First Name
- Allen
- Last Name
- Murray
- Member #
-
27152
- Ham/GMRS Callsign
- WRJY639
The NS Savannah used to be at Patriots Point Naval Museum here in Charleston. I toured it many years ago. It was removed due to upkeep costs and it needed to have the reactor decommissioned and removed.
Yeah, the reactor is out now, and it's pretty much totally de-radiated at this point. MARAD is expected to strike it from the register next summer, meaning they won't be paying for the pier or upkeep any longer and it will go to auction or something, and then it's up to whether some organization will take over the costs, or if it'll end up like the UNITED STATES, which is about to get sunk as an artificial reef. Would be a shame to see it go out like that.
Forgot, another small project. I put some light tint on the truck during the original build, but for the sake of security and of sleeping inside the rig, figured I'd do some real dark stuff. I really, really suck at tint. So I did a pretty half-assed job, but it looks fine I guess. I also put some vinyl trim tape on the edges of the sliding windows (since I can't slide the tint under there so its discolored) and I actually like the look - almost makes it look like it's framed now. Anyhow, nice and dark now (5%). I also did a 4-5" strip at the top of the windshield since these sun visors suck bad and don't pivot down easily, and this huge windshield always seems to face into the sun, exacerbated by 280,000 miles of rock chips and a bit of welding spatter :/
